The SparkFun NEO-D9S GNSS Correction Data Receiver is a satellite data receiver for L-Band correction broadcast.
Special Order
Shipping from $9.90
+50 more from our supplier in 7-10 days
Our Code: SKU-009573
Supplier Link: [SparkFun MPN:19390]
The SparkFun NEO-D9S GNSS Correction Data Receiver is a satellite data receiver for L-Band correction broadcast. It can be configured for use with a variety of correction services including u-blox's PointPerfect satellite GNSS augmentation service, which provides homogenous coverage in the contiguous USA. With a clear view of the sky, especially a clear view to the South, it decodes the satellite transmission and outputs a correction stream, enabling a multi-band high-precision GNSS receiver (such as the u-blox ZED-F9P) to reach accuracies down to centimetre-level positioning without needing a separate RTK or NTRIP correction!
The board is equipped with a USB-C connector so you can hook the board to your laptop and configure the device using u-blox u-centre if you want to. We've also equipped the breakout board with two Qwiic connectors, so you can connect it quickly and easily to your favourite development board and control it using our sophisticated u-blox GNSS Arduino Library. An SMA connector is included for a secure connection to an L-Band antenna. Power, I2C, UART1, UART2, and SPI are broken out to 0.1" spaced PTH pins. By connecting the NEO-D9S breakout to one of the ZED-F9P's communication ports, you will be able to know where your (or any object's) X, Y, and Z location is to better than an inch, without needing a separate correction source!
Accessories Required: This product requires a suitable L-Band antenna. The ANN-MB-00 GNSS Multiband Antenna (GPS-15192) won't work with Europe's PointPerfect L-Band correction service.
Choose a compatible antenna from our Hookup Accessories section below for L-Band correction in Europe. We've carefully selected accessories that work seamlessly with this service.
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
SparkFun Resources
u-blox Resources
Brands
