Products that we have just added to our catalogue.
Code: SKU-009653
This compact (0.32″×0.515″) switching step-up (or boost) voltage regulator efficiently generates 12 V from input voltages as low as 1.3 V and handles continuous input currents up to around 1.5 A. More Details...
In stock in Australia
Shipping from $2.90
+563 more from our supplier in 7-10 days
Code: SKU-008014
This compact (0.6″×0.6″) switching step-up (or boost) voltage regulator efficiently generates 12 V from input voltages as low as 1.3 V and handles continuous input currents up to 3.5 A. More Details...
In stock in Australia
Shipping from $2.90
+171 more from our supplier in 7-10 days
Code: SKU-007311
This 10 cm (4″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors as well as our connector breakout boards with top-entry and side-entry connectors. More Details...
In stock in Australia
Shipping from $2.90
+763 more from our supplier in 7-10 days
Code: SKU-010127
The AltIMU-10 v6 is an inertial measurement unit (IMU) and altimeter that features the same LSM6DSO gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v6 , and adds an LPS22DF digital barometer. More Details...
In stock in Australia
Shipping from $2.90
+141 more from our supplier in 7-10 days
Code: SKU-006894
This USB-to-serial adaptor lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for the Silicon Labs CP2102N USB-to-UART bridge that provides access to all of its control signal pins and GPIO pins. More Details...
In stock in Australia
Shipping from $2.90
+190 more from our supplier in 7-10 days
Code: SKU-008819
This compact breakout board for TI’s DRV8874 motor driver offers a wide operating voltage range of 4.5 V to 37 and can deliver a continuous 2.1 A (6 A peak) to a single bidirectional brushed DC motor. More Details...
In stock in Australia
Shipping from $7.90
+109 more from our supplier in 7-10 days
Code: SKU-010118
Controller Area Network (CAN bus) continues to be a popular communication standard in all sorts of applications from passenger vehicles to lighting control and building automation. This MicroMod function board allows you to add CAN networking to your next MicroMod project. More Details...
In stock in Australia
Shipping from $7.90
+189 more from our supplier in 7-10 days
Code: SKU-010126
The MinIMU-9 v6 is an inertial measurement unit (IMU) that packs an LSM6DSO 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board. More Details...
In stock in Australia
Shipping from $2.90
+198 more from our supplier in 7-10 days
Code: SKU-009771
This tiny breakout board for the MPS MP6550 motor driver offers a wide operating voltage range of 1.8 V to 22 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. More Details...
In stock in Australia
Shipping from $7.90
+278 more from our supplier in 7-10 days
Code: SKU-009978
The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with all the boards from the MyoWare 2.0 ecosystem to test out different configurations for your application. More Details...
In stock in Australia
Shipping from $7.90
+7 more from our supplier in 7-10 days