Detachable cable / wire connectors fit together with a press fit or include a small hook to hold them securely in place. Typically used for power connections they allow you to remove or swap a power source for recharging. The connectors are normally keyed so they can only be joined in one way preventing reverse polarity disasters.
Small 2.1mm barrel jack connectors are commonly use on Arduino boards as a power input socket. Tamiya, JST, XT and T connectors are normally used for battery pack connections where a fair amount of current is at play.
Slip rings are a more permanent connector that allow one side of a multi wire connection to rotate continuously though 360° like a radar dish scanning the horizon.
Code: SKU-000003
This is a classic 9V snap connector terminated with 2-pin polarized Molex connector with 0.1" spacing. More Details...
Code: SKU-000796
Breadboard-compatible Barrel Jack Supplier: 4UCON Supplier ID: 14 Website: www.4uconnector.com Contact Name: Eunice Contact Email: eunice@4uconnector.com Manufacturer/Supplier Part Number: 18742 MOQ: 1k pcs Cost: $0.1059 Retail: $1.25 at adafruit: http://www.adafruit.com/products/373 Part: PTH, r... More Details...
In stock in Australia
Shipping from $2.90
+1530 more from our supplier in 7-10 days
Code: CCW-20074
This DC barrel jack connector features a screw terminal at one end making it super easy to connect up some wires without soldering. A quick way to connect a plug pack power supply to a breadboard or other project. The DC connector is a common 2.1mm diameter. More Details...
In stock in Australia
Shipping from $2.90
+lots more from our supplier in 3 weeks
Code: CCW-20076
This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm centre pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well. More Details...
In stock in Australia
Shipping from $2.90
+1179 more from our supplier in 7-10 days
Code: SKU-003238
This connector adapts a 5.5 × 2.1 mm DC barrel jack to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labelled positive and negative, with the positive terminal connected to the centre pin. More Details...
In stock in Australia
Shipping from $2.90
+1652 more from our supplier in 7-10 days
Code: SKU-003237
This connector adapts a 5.5 × 2.1 mm DC barrel plug to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labelled positive and negative, with the positive terminal connected to the centre contact. More Details...
In stock in Australia
Shipping from $9.90
+1499 more from our supplier in 7-10 days
Code: CCW-20101
This is a standard PCB-mountable barrel-type jack for DC power adapters with 2.1 mm centre holes. More Details...
In stock in Australia
Shipping from $9.90
+372 more from our supplier in 7-10 days
Code: SKU-000709
This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug 1 female plug plus pins to connect them both. More Details...
In stock in Australia
Shipping from $2.90
+546 more from our supplier in 7-10 days
Code: CCW-20106
This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed. More Details...
In stock in Australia
Shipping from $9.90
+435 more from our supplier in 7-10 days
Code: CCW-20107
This male JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed. More Details...
In stock in Australia
Shipping from $9.90
+381 more from our supplier in 7-10 days
Brands