Detachable cable / wire connectors fit together with a press fit or include a small hook to hold them securely in place. Typically used for power connections they allow you to remove or swap a power source for recharging. The connectors are normally keyed so they can only be joined in one way preventing reverse polarity disasters.
Small 2.1mm barrel jack connectors are commonly use on Arduino boards as a power input socket. Tamiya, JST, XT and T connectors are normally used for battery pack connections where a fair amount of current is at play.
Slip rings are a more permanent connector that allow one side of a multi wire connection to rotate continuously though 360° like a radar dish scanning the horizon.
Code: SKU-000003
This 9V battery style connector has a 2-pin polarized Molex connector on the other end and is 100mm in length. The 9V style connector is also found on some AA and AAA battery packs. More Details...
In stock in Australia
Shipping from $7.90
+67 more from our supplier in 7-10 days
Code: SKU-001784
This is a 3.5mm TRRS SMD audio jack. TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. More Details...
In stock in Australia
Shipping from $2.90
+1489 more from our supplier in 7-10 days
Code: SKU-000796
This DC barrel jack connector fits nicely into a breadboard for easy prototyping. The plug fits a standard 5.5mm diameter plug with a 2.1mm hole as commonly found on many AC-DC adaptors and boards like Arduinos. More Details...
In stock in Australia
Shipping from $2.90
+4923 more from our supplier in 7-10 days
Code: CCW-20076
This DC barrel jack connector is a common 2.1mm diameter and is designed for making your own cable by soldering wires to the connector. Good quality. More Details...
In stock in Australia
Shipping from $2.90
Code: CCW-20074
This DC barrel jack connector features a screw terminal at one end making it super easy to connect up some wires without soldering. A quick way to connect a plug pack power supply to a breadboard or other project. The DC connector is a common 2.1mm diameter. More Details...
In stock in Australia
Shipping from $2.90
+lots more from our supplier in 3 weeks
Code: CCW-20101
This is a standard PCB-mountable barrel-type jack for DC power adapters with 2.1 mm centre holes. More Details...
In stock in Australia
Shipping from $2.90
+569 more from our supplier in 7-10 days
Code: SKU-000709
These 2-pin JST RCY connectors are suitable for up to 10A and commonly found in radio controlled vehicles. The connectors are polarised so they can't be inserted backwards making them ideal for power supplies. The set includes 1 male plug, 1 female plug and crimp pins. More Details...
In stock in Australia
Shipping from $2.90
+659 more from our supplier in 7-10 days
Code: CCW-20106
This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed. More Details...
In stock in Australia
Shipping from $2.90
+390 more from our supplier in 7-10 days
Code: CCW-20107
This male JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that power cannot be reversed. More Details...
In stock in Australia
Shipping from $2.90
+180 more from our supplier in 7-10 days
Code: SKU-000495
This JST right angle connector has 2-pins and is a PH series. The pin spacing is 2mm and the connector is rated at 1A/100V. More Details...
In stock in Australia
Shipping from $2.90
+751 more from our supplier in 7-10 days
Brands