Connectors - Wire

Wire and power cable connectors

Detachable cable / wire connectors fit together with a press fit or include a small hook to hold them securely in place. Typically used for power connections they allow you to remove or swap a power source for recharging. The connectors are normally keyed so they can only be joined in one way preventing reverse polarity disasters.

Small 2.1mm barrel jack connectors are commonly use on Arduino boards as a power input socket. Tamiya, JST, XT and T connectors are normally used for battery pack connections where a fair amount of current is at play.

Slip rings are a more permanent connector that allow one side of a multi wire connection to rotate continuously though 360° like a radar dish scanning the horizon.

Clear

Tamiya Plug with 10cm Leads, Male

Code: SKU-003080

This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected.

$ 3.55

In stock in Australia

We can ship 1045 more in 7-10 days

TRRS Audio Plug - 3.5mm (Metal)

Code: SKU-005663

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve," which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground.

$ 2.10

In stock in Australia

We can ship 337 more in 7-10 days

2x5 Pin IDC Ribbon Cable

Code: SKU-000197

Handy for AVR programming this 6" (150mm) IDC ribbon cable is also great for general communication uses. The cable is terminated with two 5x2 socket plugs.

$ 2.60

Special Order

We can ship 673 more in 7-10 days

6-Pin Chassis Connector - Panel Mount (male and female)

Code: SKU-001017

This 6-pin connector and plug set is great when you need to create a robust connection for signal or power. This product consists of two separate parts, the panel-mount jack and the mating plug.

$ 6.95

Special Order

We can ship 661 more in 7-10 days

9 Pin Female Serial Connector - PCB Mount

Code: SKU-000046

DB9 female header - right angle PCB mount. 0.318" Style. Documents: Datasheet

$ 3.40

Special Order

We can ship 1828 more in 7-10 days

Amphenol FCI Clincher Connector (2 Position, Female)

Code: SKU-004084

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed.

$ 3.90

Special Order

We can ship 940 more in 7-10 days

Amphenol FCI Clincher Connector (2 Position, Male)

Code: SKU-004085

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed.

$ 3.90

Special Order

We can ship 1312 more in 7-10 days

Amphenol FCI Clincher Connector (3 Position, Female)

Code: SKU-004086

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed.

$ 2.00

Special Order

We can ship 261 more in 7-10 days

Amphenol FCI Clincher Connector (3 Position, Male)

Code: SKU-004087

These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed.

$ 2.00

Special Order

We can ship 2456 more in 7-10 days

ATX Power Supply Connector - Right Angle

Code: SKU-000442

This is a right-angle, 24-pin Molex Mini-Fit Jr.™ connector, commonly used as the power supply connector on ATX motherboards. Two rows of twelve pins are broken out two rows of through-hole male headers. See the datasheet below for pin spacing dimensions.

$ 2.70

Special Order

We can ship 160 more in 7-10 days