Standalone accelerometer sensors are useful when less information is required than a full IMU.
Accelerometers sensors provide a reading based on the acceleration in one or more directions at the same time.
These sensors are ideal for communicating with a microcontroller or via a computer through an adaptor.
Code: SKU-003389
The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g and ±125°/s to ±2000°/s, available through I²C and SPI interf... More Details...
In stock in Australia
We can ship 87 more in 7-10 days
Code: SEN-10029
This triple-axis accelerometer is a carrier board for the Freescale MMA7361L XYZ-axis accelerometer, a great low-g sensor with analog voltage outputs and adjustable sensitivity (±1.5 g or ±6 g), and a 0g-detect digital output that signals when the board is in free-fall. The board has a 3.3V linea... More Details...
On Sale!
Was $17.95
In stock in Australia
Our supplier is out of stock
Code: SKU-000367
Breakout board for the 3 axis ADXL335 from Analogue Devices. This is the latest in a long, proven line of analogue sensors - the holy grail of accelerometers. More Details...
In stock in Australia
We can ship 430 more in 7-10 days
Code: SKU-001847
The ADXL337 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analogue voltage outputs that measures acceleration with a full-scale range of ±3g. This board has broken out all the pins you’ll need to get the necessary data from the accelerometers. More Details...
In stock in Australia
Our supplier is out of stock
Code: SKU-000510
This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. More Details...
In stock in Australia
We can ship 380 more in 7-10 days
Code: SKU-004500
The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I 2 C and SPI interface options. Though not necessarily good at detecting minute changes, the H3LIS331DL is great for grueling conditions that normal accelerometers aren’t suited for. More Details...
In stock in Australia
We can ship 107 more in 7-10 days
Code: SKU-000650
This is a breakout board for the ultra low-power LIS331HH three axis linear accelerometer. The device has a digital I2C/SPI serial interface which makes it ideal for using in embedded applications. All major pins are broken out to 0.1" spaced headers. It also includes two mounting holes as well. More Details...
On Sale!
Was $20.95
In stock in Australia
We can ship 87 more in 7-10 days
Code: SKU-007635
DFRobot Gravity: BMX160+BMP388 10 Depth of Field (DOF) Sensor combines the BMX160 9-axis absolute orientation sensor and BMP388 barometric pressure sensor on to a single module. More Details...
Special Order
Our supplier is out of stock
Code: SKU-002264
The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring acceleration forces on the x, y, and z axis. By measuring the amount of acceleration (or lack there of) your robot can get a better understanding of its movements. More Details...
Special Order
Our supplier is out of stock
Code: SKU-001001
This 3-axis accelerometer ADXL362 has very low power consumption and selectable range of ±2, ±4, or ±8g. Communication over SPI interface. More Details...
Special Order
We can ship 74 more in 7-10 days
Brands