Let your robot or electronic project display complex information with a visual display.
LCD displays are often used as they have very low power requirements and are an easy way to display textual or graphic information. Add a menu system to your project or provide status reports so you know what is going on.
Code: SKU-000031
This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset ( datasheet ). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight. More Details...
In stock in Australia
Shipping from $2.90
+55 more from our supplier in 7-10 days
Code: DIS-50005
Supporting both serial and I2C interfaces this 20 x 4 character LCD display is an easy way to add a display device to a robot. Using a 5v this LCD display includes software control of a backlight and custom characters. More Details...
In stock in Australia
Shipping from $7.90
+lots more from our supplier in 7 days
Code: SKU-006782
The SparkFun Qwiic OLED Display can display up to three lines of text and features 128x32 pixels in a small 0.91” (diagonal) frame. As an OLED, this display does not have a back light layer (unlike LCDs) and therefore it’s thinner, consumes less power, and has higher contrast. More Details...
In stock in Australia
Shipping from $2.90
Code: SKU-002376
This compact 8 x 2 LCD is great for small microcontroller projects where you want more than just a blinking LED for feedback. This unit uses the standard HD44780 parallel interface and features a black bezel . More Details...
Special Order
Shipping from $7.90
+77 more from our supplier in 7-10 days
Code: SKU-000307
This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface ( datasheet ). Interface code is widely available for many different controllers and systems. You will need ~11 general I/O pins to interface to this LCD screen. More Details...
Special Order
Shipping from $2.90
+11 more from our supplier in 7-10 days
Code: SKU-000812
This is similar to other 16x2 character LCDs that you’ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any colour you want by controlling the three backlight levels. More Details...
Special Order
Shipping from $2.90
+23 more from our supplier in 7-10 days
Code: SKU-000106
This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely common HD44780 parallel interface chipset ( datasheet ). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. More Details...
Special Order
Shipping from $2.90
+100 more from our supplier in 7-10 days
Code: SKU-000107
This is a framed graphical LCD 64x128 with LED backlight. This unit is a very clear STN type LCD with a simple command interface. This new module includes the negative voltage circuitry on board! Utilizes the extremely common KS0108B parallel interface chipset ( datasheet ). More Details...
Special Order
Shipping from $2.90
+61 more from our supplier in 7-10 days
Code: SKU-000599
The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen. This one is mounted on an easy to solder PCB. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. More Details...
Not currently available
Code: SKU-006426
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. More Details...
Special Order
Shipping from $2.90
+33 more from our supplier in 7-10 days
Brands