Environment

Environmental Sensors for Temperature and Humidity

Thermocouple Type-K - Glass Braid Insulated (Bare Wire)

Code: SKU-000030

36" high temperature Type-K Thermocouple with glass braid insulation. Features: Type-K Thermocouple (Ni-Cr) 30 gauge stripped and prepped wires Thermocouple range : -270 to +1372C (-454 to +2501F) Glass braid insulation range : -73 to +482C(-100 to +900F) Yellow + / Red - Works great with our The...

$25.95

In Stock: Ships Today

Back orders: 0 available

Thermocouple Type-K - Stainless Steel

Code: SKU-002200

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a ‘hot’ end and a ‘cold’ one).

$8.95

In Stock: Ships Today

Back orders:
Ship 137 units in 7 days

CCS811 CO2 and TVOC Air Quality Sensor

Code: SKU-003928

The CCS811 is a sensor for detecting the level of carbon dioxide (CO2) and Total Volatile Organic Compounds (TVOCs) in the air. TVOC combined with CO2 is used to measure indoor air quality or IAQ.

$88.95

Order As Required

Back orders: 0 available

CO₂ Humidity and Temperature Sensor - SCD30

Code: SKU-005247

The SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature and humidity sensing built-in, as well as commands to set the current altitude.

$122.95

Order As Required

Back orders: 0 available

HIH-4030 Humidity Sensor Carrier

Code: SKU-002710

Sparkfun’s carrier board for the HIH-4030 relative humidity (%RH) sensor from Honeywell outputs an analogue voltage that varies nearly linearly with humidity. It operates at 5 V while drawing only 200 μA and has a 0.1" pin spacing that makes it compatible with standard breadboards and perfboards.

$32.95

Order As Required

Back orders: 0 available

LPS25H Pressure/Altitude Sensor Carrier with Voltage Regulator

Code: SKU-003379

This carrier for ST.’s LPS25H digital barometer measures pressures from 260 mbar to 1260 mbar (26 kPa to 126 kPa) with absolute accuracy down to ±0.2 mbar (0.02 kPa) and typical RMS noise of 0.01 mbar (1 Pa) in high-resolution mode. These pressures can easily be converted to altitudes.

$9.95

Order As Required

Back orders: 0 available

LPS25HB Pressure/Altitude Sensor Carrier with Voltage Regulator

Code: SKU-004996

This carrier for ST.’s LPS25HB digital barometer measures pressures from 260 mbar to 1260 mbar (26 kPa to 126 kPa) with absolute accuracy down to ±0.2 mbar (0.02 kPa) and typical RMS noise of 0.01 mbar (1 Pa) in high-resolution mode. These pressures can easily be converted to altitudes.

$9.95

Order As Required

Back orders:
Ship 266 units in 7 days

LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator

Code: SKU-003054

This carrier for ST.’s LPS331AP digital barometer measures pressures from 260 mbar to 1260 mbar (26 kPa to 126 kPa) with absolute pressure accuracy over temperature down to ±2 mbar (0.2 kPa) and typical RMS noise of 0.02 mbar (0.002 kPa) in high-resolution mode.

$6.95

Order As Required

Back orders:
Ship 114 units in 7 days

MPL3115A2 Altitude/Pressure Sensor Breakout

Code: SEN-10050

MPL3115A2 Altitude/Pressure Sensor measures altitude to with 30cm resolution and includes a temperature reading. The sensor can perform autonomous data acquisition and has programmable events. Communication is via the I2C interface.

$20.95

Order As Required

Back orders:
Ship 105 units in 7 days

One-Wire Ambient Temperature Sensor - MAX31820

Code: SKU-003823

The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over its entire -55°C to +125°C operating range, the device has ±2.0°C accuracy.

$3.35

Order As Required

Back orders:
Ship 1439 units in 7 days