Code: SEN-10081
DS18B20 1-Wire digital temperature sensor from Maxim IC has a range of –55°C to +125°C. Each sensor is uniquely addressable via a 64bit serial number so lots of sensors can be used on the same bus. Powered from 3v to 5.5V the sensor has up to 12bit resolution at ±0.5°C accuracy. More Details...
Code: SKU-000598
The RHT03 (also known by DHT-22) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn’t require extra components so you can get right to measuring relative humidity and temperature. More Details...
Code: SEN-10027
The Melexis MLX90614ESF-AAA is a high-accuracy, high-resolution, non-contact thermometer with a 90-degree field of view. It has a measurement resolution of 0.02°C and is factory calibrated for a wide -70 to 380°C object temperature range. The sensor uses an SMBus (I²C-compatible) digital interfac... More Details...
Code: SEN-10085
Measure the moisture level in soil using the SparkFun Soil Moisture Sensor. The two probes are inserted into dirt, sand or similar materials and the sensor returns an analog voltage signal based on the amount of conductivity due to the water in the soil. More Details...
Code: SEN-10059
DHT11 digital temperature and humidity sensor features low power consumption, temperature compensation and inbuilt microcontroller for accurate readings. Easy hookup using the included cable. More Details...
Code: SKU-000879
This waterproof digital temperature probe with a total length of 6 feet has a temperature range of -55°C to+125°C and uses 1-wire interface for communication. More Details...
Code: SEN-10079
The TMP36 is a simple to use temperature sensor with an analog voltage output that varies linearly with the ambient temperature. It reads from −40°C to +125°C and operates at 2.7V - 5.5V DC so is suitable for most microcontrollers or analog circuits. More Details...
Code: SKU-002200
This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a ‘hot’ end and a ‘cold’ one). More Details...
Code: SKU-003928
The CCS811 is a sensor for detecting the level of carbon dioxide (CO2) and Total Volatile Organic Compounds (TVOCs) in the air. TVOC combined with CO2 is used to measure indoor air quality or IAQ. More Details...
Code: SKU-002710
Sparkfun’s carrier board for the HIH-4030 relative humidity (%RH) sensor from Honeywell outputs an analogue voltage that varies nearly linearly with humidity. It operates at 5 V while drawing only 200 μA and has a 0.1" pin spacing that makes it compatible with standard breadboards and perfboards. More Details...
Brands
Gift Vouchers
