Other bits and pieces for prototyping.
Code: SKU-000013
A staple for the electrical engineer. I can’t tell you how many times I’ve been one clip short! Note: Sold as a single unit. More Details...
Code: SKU-000640
These alligator clips are useful for smaller wires that you don’t want to deform. The clip has smooth flat metal blades that clamp down on the wire, making for a good connection to thinner wires. There are strain relief crimp points and a solder hole at the end of the clip. Sold in single units. More Details...
Code: SKU-002106
This is the Circuit Scribe Conductive Ink Pen, a simple looking ball-point pen that allows you to draw circuits instead of soldering or wiring them to a breadboard. More Details...
Code: SKU-002254
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder, like the stained glass on Tiffany lamps. More Details...
Code: CCW-20145
This self adhesive copper tape is 5mm wide in rolls of 15m (50ft) with 3mil thickness. Use for making antennas, RF shielding, low profile circuits and art projects. More Details...
Code: SKU-000397
We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors, lots of sizes, nothing too long. More Details...
Code: SKU-000048
The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a computer. More Details...
Code: SKU-002446
Blue shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. More Details...
Code: SKU-002448
Red shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. More Details...
Code: SKU-002447
Yellow shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. More Details...