Other

Other Prototyping Parts

Other bits and pieces for prototyping.

Heatsink TO-220

Code: SKU-000018

Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation.

$1.10

Order As Required

Back orders:
Ship 1414 units in 7 days

High Temperature Adhesive Tape - (1cm, 33m)

Code: SKU-000755

This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator, like electrical tape, but it can withstand temperatures as high as 258 ° C (496 ° F). It also provides good resistance to corrosion and the silicone adhesive holds tight throughout the tape’s rated temperature range.

$6.95

Order As Required

Back orders:
Ship 50 units in 7 days

Jumper - 2 Pin

Code: SKU-000303

These are two pin jumpers (also called shunts) that will create an electrical connection between two pin headers. Commonly used to modify settings on a board or device.

$0.45

Order As Required

Back orders:
Ship 116 units in 7 days

Medium Heatsink

Code: SKU-004132

This is a medium-sized heatsink that has been designed to dissipate heat away from your boards and ICs. Each of these black anodized heatsinks is perfect when used in conjunction with our ESP32 Thing Power Control Shield , but it also fits the TO-220 package. Documents: Dimensional Drawing

$2.80

Order As Required

Back orders: 0 available

Panel Mount Nut - M12-0.75 (bag of 25)

Code: SKU-001960

We understand that small part tend to get lost or damaged easily. These Panel Mount Nuts are handy replacement units that fit most of our panel mount parts. These parts include our toggle switch covers, laser modules, or anything else with an M12 diameter and 0.75mm thread.

$1.70

Order As Required

Back orders:
Ship 186 units in 7 days

Pogo Pin w/ Chiseled Tip

Code: SKU-000265

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes.

$2.45

Order As Required

Back orders:
Ship 60 units in 7 days

Pogo Pin w/ Concave Tip

Code: SKU-000581

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes.

$2.45

Order As Required

Back orders:
Ship 528 units in 7 days

Pogo Pin w/ Pointed Tip

Code: SKU-000343

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes.

$1.35

Order As Required

Back orders:
Ship 304 units in 7 days

Pogo Pin w/ Round Tip

Code: SKU-000342

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes.

$1.35

Order As Required

Back orders:
Ship 222 units in 7 days

SparkFun Breadboard Power Supply 5V/3.3V

Code: SKU-000015

Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated voltage. The .1" headers are mounted on the bottom of the PCB for simple insertion into a breadboard. Pins labelled VCC and GND plug directly into the power lines.

$15.95

Order As Required

Back orders:
Ship 30 units in 7 days