Dual Channel

Dual Channel DC Motor Controllers

Control two brushed DC motors using these motor controllers. Different sizes are available to power small to medium sized brushed DC motors. Capabilities can include full speed and direction control with feedback support and built in PID control.

Interfacing to the controllers can be done via methods such as USB, TTL Serial, Analog or Radio Control signals.

Sabertooth 2X12 Dual Motor Driver

Code: MCU-60035

Sabertooth 2X12 dual regenerative motor driver from Dimension Engineering drives two robot DC motors with a continuous current of 12A and peak of 25A. Features thermal protection and soft current limiting making it very hard to kill. This versatile driver communicates via serial, packetized seria...

$159.95

In Stock: Ships Today

Back orders:
Ship in 3 weeks

Sabertooth 2x32 Dual Motor Driver

Code: MCU-60157

Sabertooth 2X32 dual regenerative motor driver from Dimension Engineering drives two robot DC motors with a continuous current of 32A and peak of 64A. Features thermal protection and soft current limiting making it very hard to kill. This versatile driver communicates via serial, packetized seria...

$217.95

In Stock: Ships Today

Back orders:
Ship in 3 weeks

Sabertooth 2X5 Dual Motor Driver

Code: MCU-60034

Sabertooth 2X5 dual regenerative motor driver from Dimension Engineering drives two robot DC motors with a continuous current of 5A and peak of 10A. Features thermal protection and soft current limiting making it very hard to kill. This versatile driver communicates via serial, packetized serial,...

$119.95

In Stock: Ships Today

Back orders:
Ship in 3 weeks

SN754410 Quad Half H-Bridge Motor Driver 1A (L293D compatible)

Code: MCU-60011

Capable of driving high voltage motors using TTL 5V logic levels, the SN754410 can drive 4.5V up to 36V at 1A continuous output current! This is a pin to pin compatible replacement for the L293D.

$7.95

In Stock: Ships Today

Back orders:
Ship in 3 weeks

A4990 Dual Motor Driver Carrier

Code: SKU-003060

This compact breakout board makes it easy to use Allegro’s A4990 dual motor driver, which can control two bidirectional DC motors over a wide operating voltage range of 6 V to 32 V.

$7.95

Order As Required

Back orders:
Ship 295 units in 7 days

Case with Fan for RoboClaw 2x15A, 2x30A, and 2x45A

Code: SKU-005393

This translucent red plastic case with integrated fan is intended for use with 2x15A , 2x30A , 2x45A , and ST. 2x45A RoboClaws. The case serves to protect the RoboClaw while the fan adds cooling, allowing the motor controller to deliver higher continuous currents and sustain peak currents longer.

$37.95

Order As Required

Back orders:
Ship 13 units in 7 days

Dual MAX14870 Motor Driver for Raspberry Pi (Assembled)

Code: SKU-004609

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small brushed DC motors.

$24.95

Order As Required

Back orders:
Ship 180 units in 7 days

Dual MAX14870 Motor Driver for Raspberry Pi (Partial Kit)

Code: SKU-004653

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small brushed DC motors.

$15.95

Order As Required

Back orders:
Ship 223 units in 7 days

Dual MAX14870 Motor Driver Shield for Arduino

Code: SKU-004608

This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board.

$15.95

Order As Required

Back orders:
Ship 298 units in 7 days

Dual TB9051FTG Motor Driver for Raspberry Pi (Assembled)

Code: SKU-004771

This add-on board enables a Raspberry Pi B+, Pi A+, Pi 2 or Pi 3 to drive a pair of brushed DC motors. Its dual TB9051FTG motor drivers operate from 4.5 V to 28 V and can deliver a continuous 2.6 A (5 A peak) per motor.

$31.95

Order As Required

Back orders:
Ship 75 units in 7 days