Control two brushed DC motors using these motor controllers. Different sizes are available to power small to medium sized brushed DC motors. Capabilities can include full speed and direction control with feedback support and built in PID control.
Interfacing to the controllers can be done via methods such as USB, TTL Serial, Analog or Radio Control signals.
Code: SKU-004654
This breakout board makes it easy to use Toshiba’s TB67H420FTG brushed DC motor driver, which can operate in either dual-channel mode for independent bidirectional control of two motors or single-channel mode for driving one motor with increased current. More Details...
Code: SKU-003060
This compact breakout board makes it easy to use Allegro’s A4990 dual motor driver, which can control two bidirectional DC motors over a wide operating voltage range of 6 V to 32 V. More Details...
Code: SKU-005393
This translucent red plastic case with integrated fan is intended for use with 2x15A , 2x30A , 2x45A , and ST. 2x45A RoboClaws. The case serves to protect the RoboClaw while the fan adds cooling, allowing the motor controller to deliver higher continuous currents and sustain peak currents longer. More Details...
Code: SKU-004653
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small brushed DC motors. More Details...
Code: SKU-004608
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. More Details...
Code: SKU-004771
This add-on board enables a Raspberry Pi B+, Pi A+, Pi 2 or Pi 3 to drive a pair of brushed DC motors. Its dual TB9051FTG motor drivers operate from 4.5 V to 28 V and can deliver a continuous 2.6 A (5 A peak) per motor. More Details...
Code: SKU-004770
This add-on board enables a Raspberry Pi (Model B+ or newer) to drive a pair of brushed DC motors. Its dual TB9051FTG motor drivers operate from 4.5 V to 28 V and can deliver a continuous 2.6 A (5 A peak) per motor. More Details...
Code: SKU-004769
This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual TB9051FTG motor drivers operate from 4.5 to 28 V and can deliver a continuous 2.6 A per motor (5 A peak). More Details...
Code: SKU-002390
If you are looking to drive two high-power motors through one compact unit, these dual VNH2SP30 motor driver carriers are perfect for you. With these boards, it’s easy to get a medium-sized, differential drive robot running in no time. More Details...
Code: SKU-005194
The MCP motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RS-232 serial, CAN bus, RC, or analogue inputs. More Details...