A shield is an auxiliary board that typically attaches to an Arduino Uno compatible board via the headers on either side of the board. They allow the addition of new capabilities to the general purpose microcontroller board. Shields can allow for connection of high power DC motors, relays, sensors, WiFi communications and many other specialized functions.
Not all shields can be used at the same time and compatibility can vary to board other than the Uno like the Leonardo. Please check the documentation first.
Code: SKU-003413
The Adafruit NeoPixel Shield for Arduino contains 40 individually addressable RGB LEDs arranged in a 5×8 matrix, and only a single (customisable) Arduino pin is required to control them all. Multiple NeoPixel Shields can also be chained together to create larger arrays. More Details...
Code: SKU-003414
This Arduino shield from Adafruit features TI’s CC3000 Wi-Fi module with an onboard ceramic antenna, a microSD card socket, and a designated prototyping area. The CC3000 uses SPI for communication instead of UART, so the communication speed is not limited to a fixed baud rate. More Details...
Code: SKU-003411
This data logger lets you save data to files on any FAT16- or FAT32-formatted SD card easily from an Arduino, which can then be read by most plotting, spreadsheet, or analysis programs. More Details...
Code: SKU-004516
The Adafruit Data Logging Shield for Arduino lets you save data to files on any FAT16- or FAT32-formatted SD card easily from an Arduino, which can then be read by most plotting, spreadsheet, or analysis programs. More Details...
Code: SKU-001120
Most widgets could benefit from a shiny touchscreen interface. Unfortunately, it’s usually not easy to hook up a touchscreen and driving a display is often too taxing on your controller. More Details...
Code: MCU-60167
Connect your Arduino to the Internet with this Arduino Ethernet shield. The Wiznet W5500 chip on board supports TCP/IP, UDP and 8 simultaneous socket connections. Plug in a standard Cat5/6 Ethernet cable and your Arduino is ready to talk on your network. More Details...
Code: SKU-001082
By popular request, we’re selling the always-handy ProtoShield PCB on its own! Originally spawned with collaboration between the folks at SFE and ITP @ NYU , the ProtoShield mates with an Arduino development board and gives the user a small soldering area, two general LED footprints, access to a ... More Details...
Code: KIT-70006
Designed to work with the Arduino Uno and Duemilanove USB Board this prototyping shield provides a small soldering area, two general LED's, access to a BlueSMirF socket, a general pushbutton switch and the Arduino reset switch is brought to the top level. This shield is the perfect way to add bui... More Details...
Code: SKU-001110
Sometimes you’ve got way too many inputs, or outputs… or both. How are you going to get them all connected to your Arduino? The Mux Shield, that’s how. More Details...
Code: SKU-003268
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. More Details...