Terminal Blocks - Screw

Screw Terminal Blocks

Screw Terminal Block: 10-Pin, 0.1″ Pitch, Side Entry

Code: SKU-003266

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has ten terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

$3.65

Order As Required

Backorders:
Ship 66 units in 7 days

Screw Terminal Block: 2-Pin, 0.1″ Pitch, Side Entry (4-Pack)

Code: SKU-003258

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. Each block has two terminals for the stripped ends of 26 – 18 AWG wires.

$3.05

Order As Required

Backorders:
Ship 249 units in 7 days

Screw Terminal Block: 3-Pin, 0.1″ Pitch, Side Entry (3-Pack)

Code: SKU-003259

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. Each block has three terminals for the stripped ends of 26 – 18 AWG wires.

$3.35

Order As Required

Backorders:
Ship 325 units in 7 days

Screw Terminal Block: 4-Pin, 0.1″ Pitch, Side Entry (2-Pack)

Code: SKU-003260

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. Each block has four terminals for the stripped ends of 26 – 18 AWG wires.

$3.05

Order As Required

Backorders:
Ship 136 units in 7 days

Screw Terminal Block: 5-Pin, 0.1″ Pitch, Side Entry (2-Pack)

Code: SKU-003261

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. Each block has five terminals for the stripped ends of 26 – 18 AWG wires.

$3.65

Order As Required

Backorders:
Ship 145 units in 7 days

Screw Terminal Block: 6-Pin, 0.1″ Pitch, Side Entry

Code: SKU-003262

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has six terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

$2.35

Order As Required

Backorders: Not Available

Screw Terminal Block: 7-Pin, 0.1″ Pitch, Side Entry

Code: SKU-003263

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has seven terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

$2.65

Order As Required

Backorders:
Ship 268 units in 7 days

Screw Terminal Block: 8-Pin, 0.1″ Pitch, Side Entry

Code: SKU-003264

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has eight terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

$3.05

Order As Required

Backorders:
Ship 168 units in 7 days

Screw Terminal Block: 9-Pin, 0.1″ Pitch, Side Entry

Code: SKU-003265

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has nine terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

$3.35

Order As Required

Backorders:
Ship 262 units in 7 days

Screw Terminals 2.54mm Pitch (2-Pin)

Code: SKU-000722

These 2 pin Screw Terminals with 2.54mm pitch are rated to 150V @ 6A. The screw terminals can use wire from 30 to 18AWG and the pins will line up with holes in 0.1" prototyping boards.

$1.15

Order As Required

Backorders:
Ship 3195 units in 7 days