COVID-19 (Coronavirus) Update: Some Delays - Read More...
New Products

New Products

Products that we have just added to our catalogue.

RoboClaw 2x60AHV, 60VDC Motor Controller (V7B)

Code: SKU-005985

The RoboClaw motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analogue inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system.

$577.95

Order As Required

Back orders: 0 available

Rocker Switch - On/Off/On (Round)

Code: SKU-005108

This little round on/off/on toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It’ll also look pretty slick in your project!

$1.85

Order As Required

Back orders:
Ship 361 units in 7 days

Rotary Encoder - Illuminated (Red/Green)

Code: SKU-005416

Rotary encoders are used similarly to potentiometers. They're different from potentiometers in that an encoder has full rotation without limits. They output grey code so that you can tell how much and in which direction the encoder has been turned.

$4.90

Order As Required

Back orders:
Ship 497 units in 7 days

RPLIDAR A3M1 360° Laser Range Scanner

Code: SKU-005238

The RPLIDAR A3M1 is the next generation of 360 degree 2D LIDARs. Each RPLIDAR A3 can take up to 16000 samples of laser ranging per second thanks to its high rotation speed. The on-board system can perform 2D 360° scans within a range of 25 meters in enhanced mode and 20 meters in outdoor mode.

$1,720.95

Order As Required

Back orders: 0 available

RPLIDAR S1 360° TOF Laser Range Scanner

Code: SKU-005999

The RPLIDAR S1 is the next generation low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. It can take up to 9200 samples of laser ranging per second with high rotation speed.

$1,597.95

Order As Required

Back orders: 0 available

Scrap Boards - Large Bag

Code: SKU-005892

Let our failure be your creation. We've got quite a stack of coasters - these are PCBs that were retired because of hardware revisions and board changes. Probably because we never could get the board to work in the first place.

$2.45

Order As Required

Back orders:
Ship 450 units in 7 days

Screw Terminals 3.5mm Pitch (4-Pin)

Code: SKU-005894

This is a Screw Terminal with 3.5mm pitch pins. Comes in 2, 3, or 4 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire.

$1.85

Order As Required

Back orders:
Ship 91 units in 7 days

Servo Extension Cable - Female to Male (Shrouded)

Code: SKU-005962

This is a 12 inch servo extension cable that comes in handy when your servo is further away from the controller than the wire on the servo allows. The male connector on one end goes to controller, while the female connector mates with servo.

$4.90

Order As Required

Back orders:
Ship 894 units in 7 days

Sharp Distance Sensor Kit for Romi/TI-RSLK MAX

Code: SKU-005637

This upgrade kit for the Romi/TI-RSLK MAX lets you add obstacle detection and ranging to your Romi/TI-RSLK MAX robot.

$83.95

Order As Required

Back orders:
Ship 14 units in 7 days

Shunt Regulator: 13.2V, 1.33Ω, 9W

Code: SKU-005097

This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to.

$5.95

Order As Required

Back orders:
Ship 149 units in 7 days