Designed specifically for beginners and younger students this kit will teach all the basic skills needed for making and programming robots. The kit is Arduino compatible and allows you to create 2 different robots (one at a time).
Our supplier is out of stock
Our Code: KIT-70037
Some of these kits ship with alternative remote controls from the one pictured in the manual on page 17. The buttons are all in the same places, but a different procedure is required to configure the remote to work with the robot. If your control looks like the manual then ignore this.
The robot should now understand commands. Pressing the green "Calibration" button should toggle the robot between normal (White LED On) and configuration modes (Red LED On).
Fitting the backlegs to the hexapod. The hole in the centre of the round servo horn will need to be enlarged with a 3mm drill bit or similar so that the horn rotates freely on the M3x25 bolt (piece #21).