1. Home
  2. Cables & Wire
  3. Hook Up

XRP Motor to Breadboard Jumper Cable - 6in. (6-pin JST-SH)

This is a jumper adaptor cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pigtail on the other.

3.30

Not currently available

Our Code: SKU-010593

Supplier Link: [SparkFun MPN:25597]

Description

This is a jumper adaptor cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pigtail on the other. This cable was designed to allow users to easily breakout the pins from the motor connectors on the XRP control board.

Specifications

  • Length: 6 inches
  • Wire Gauge: 28 AWG
  • Connector Type: JST-SH
  • Pin Count: 6

Resources

Related Products

$3.55 Breadboard to JST-ZHR Cable - 6-pin x 1.5mm Pitch
$4.95 Breadboard to JST-GHR-06V Cable - 6-Pin x 1.25mm Pitch (For Lo...
$3.55 Breadboard to JST-GHR-06V Cable - 6-Pin x 1.25mm Pitch
$3.00 Breadboard to JST-ZHR Cable - 4-pin x 1.5mm Pitch
$1.30 Breadboard to JST-ZHR Cable - 4-pin x 1.5mm Pitch (Single Conn...
$3.55 JST SH Jumper 6 Wire Assembly - 8"
$6.95 Breadboard to JST-ZHR Cable - 5-pin x 1.5mm Pitch
$1.30 Breadboard to JST-GHR-05V Cable - 5-Pin x 1.25mm Pitch (Single...
$4.35 Breadboard to JST-GHR-04V Cable - 4-Pin x 1.25mm Pitch
$3.55 JST SH Jumper 4 Wire Assembly - 8"
$4.65 JST-GHR-04V to JST-GHR-06V Cable - 150mm
$2.85 Breadboard to JST-GHR-05V Cable - 5-Pin x 1.25mm Pitch
$3.40 Jumper Wire - 0.1", 6-pin, 6"
$5.95 Insulated GPIO Header - Female (PTH, 0.1in., 2x20-Pin)
$3.30 USB to Micro-B Adapter
$5.95 Thumb Joystick - Deluxe
$19.95 Temperature Sensor - High Temperature, Waterproof (DS18B20)
$2.85 JST to Breadboard Jumper (3-pin)
$18.95 Pan/Tilt Camera Bracket Kit (Single Attachment)
$9.95 Passive PoE Cable Set
$53.95 Pulse Sensor
$11.95 Molex Flexible GNSS Antenna - U.FL (Adhesive)
$2.70 Raspberry Pi Pico Header Kit
$3.10 Straight Header - Female (PTH, 0.1in., 40-Pin)
$3.55 Thin Speaker - 4 Ohm, 2.5W, 28mm
$7.95 SparkFun Capacitive Touch Breakout - AT42QT1011