Materials

Materials for Wearable Electronics

Clear

Bare Conductive - Electric Paint (50ml)

Code: SKU-000854

Bare Conductive’s Electric Paint is just like any other water-based paint… except that it’s electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls, almost anything you can think of.

$ 60.95

In stock in Australia

Shipping from $7.90

+38 more from our supplier in 7-10 days

Coin Cell Battery Holder - 20mm (Sewable)

Code: SKU-000255

This coin cell battery holder for CR2032 batteries has holes that allow for easy sewing onto fabric for wearable projects and the battery easily clips in and out for replacement. The battery tabs can also be soldered to.

$ 2.80

In stock in Australia

Shipping from $2.90

+1325 more from our supplier in 7-10 days

Conductive Thread - 60g (Stainless Steel)

Code: SKU-001135

This is about 360 yards of conductive thread spun from stainless steel fibre and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects.

$ 95.95

In stock in Australia

Shipping from $7.90

+27 more from our supplier in 7-10 days

Conductive Thread Bobbin - 30ft (Stainless Steel)

Code: SKU-000815

This conductive thread on a bobbin is made of stainless steel fibres is ideal for sewing e-textile wearable projects and comes on a small bobbin. Length of 9 m / 30 feet.

$ 5.95

In stock in Australia

Shipping from $2.90

+131 more from our supplier in 7-10 days

Needle Set - 5 Pack

Code: SKU-000676

This set of 5 sewing needles is great for sewing together an e-textile project. The set contains three 48mm long, 1.23mm thick needles and two smaller 39mm long, 0.67mm thick needles. The needles are ideal for use with our conductive thread.

$ 2.55

In stock in Australia

Shipping from $2.90

+386 more from our supplier in 7-10 days

Smooth Thread Bobbin - 12m (Stainless Steel)

Code: SKU-002239

This is 12 meters of smooth conductive thread spun from stainless steel fibre and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread.

$ 8.95

In stock in Australia

Shipping from $2.90

+22 more from our supplier in 7-10 days

Thermochromatic Pigment - Bright Yellow (20g)

Code: SKU-001039

We’ve all seen toys and things that change colour when you run them under warm water or heat them up in the sun. Some of us were especially mesmerized and had to find out what made them do that.

$ 19.95

In stock in Australia

Shipping from $2.90

Bare Conductive - Electric Paint Pen (10ml)

Code: SKU-001028

Bare Conductive’s Electric Paint pen has conductive ink so you can draw circuits on wood, fabric, paper and more. The paint is non-toxic and water based so it is not stinky and can be removed with soap and water.

$ 23.95

Not currently available

EeonTex Conductive Fabric

Code: SKU-003924

This EeonTex fabric is a conductive, nonwoven microfiber for use in e-textiles as well as electromagnetic and resistive heating applications. Each sheet of the EeonTex Conductive Fabric is pre-cut into 12 inch by 13 inch sheets about 0.8mm thick.

$ 23.95

Special Order

Shipping from $7.90

+11 more from our supplier in 7-10 days

Snap Assortment - 30 pack (male and female)

Code: SKU-000968

These sew-on fabric snaps are the same size used on the LilyPad SimpleSnap boards. You can sew these into your project to allow for easy removal or prototyping. They are 8mm snaps, which is equivalent to a size #1/0 at your local fabric shop. Includes: 15x male snaps 15x female snaps

$ 5.95

Not currently available