Other

Other Hardware

Other hardware for putting together robots

Polymorph - 250g

Code: SKU-000842

Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand.

$15.95

In Stock: Ships Today

Backorders:
Ship 205 units in 7 days

Angle Bracket - 4-40

Code: SKU-000624

These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be used on the universal plate set for mounting all sorts of sensors and such. Sold as single units.

$0.55

Order As Required

Backorders:
Ship 569 units in 7 days

Polymorph - 1000g

Code: SKU-000843

Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand.

$58.95

Order As Required

Backorders:
Ship 28 units in 7 days

Silicone Bumpers - Large (10x16.5mm, 4 pack)

Code: SKU-000728

Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. They can also be used as feet for enclosures.

$1.70

Order As Required

Backorders:
Ship 187 units in 7 days

Silicone Bumpers - Small, Clear (8x2mm, 5 pack)

Code: SKU-000625

These are clear, self-adhesive silicone bumpers 8mm in diameter and about 2mm tall. These bumpers raise your PCB or project up off your desk which helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface.

$1.15

Order As Required

Backorders:
Ship 357 units in 7 days

Theragrip Thermal Tape

Code: SKU-000500

Aavid Thermalloy Theragrip is a double sided tape for ceramic or metal heatsink packages. Theragrip provides both good thermal performance and excellent electrical isolation. Features: Double sided adhesive Great for attaching heat sinks Dimensions: 2 x 2" (50.8 x 50.8mm) Documents: Datasheet

$5.95

Order As Required

Backorders:
Ship 316 units in 7 days