Control a single brushed DC motor using these motor controllers. Different sizes are available to power small to medium sized brushed DC motors. Capabilities can include full speed and direction control with feedback support and built in PID control.
Interfacing to the controllers can be done via methods such as USB, TTL Serial, Analog or Radio Control signals.
Code: SKU-003458
This compact breakout board for ROHM’s BD65496MUV motor driver offers an operating voltage range of 2 V to 16 V and can deliver a continuous 1.2 A (5 A peak for a few milliseconds) to a single brushed DC motor. More Details...
Code: MCU-60127
This unit is ideal for speed control of one brushed DC motor, lighting, fans, heaters and other low voltage DC applications. Using pulse width modulation the controller efficiently powers devices with little loss to heat. Single direction only, no programming or soldering required. Fully assembled. More Details...
Code: SKU-003471
This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. More Details...
Code: SKU-003459
This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. More Details...
Code: SKU-003472
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 17 A without a heat sink. More Details...
Code: SKU-003474
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 25 A without a heat sink. More Details...
Code: SKU-003473
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 13 A without a heat sink. More Details...
Code: SKU-003475
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink. More Details...
Code: MCU-60077
The powerful jrk 12v12 motor controller (12Amp Continuous/30A max) is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used as an open-loop speed control or for closed... More Details...
Code: MCU-60076
The jrk 21v3 motor controller (3Amp continuous, 5A peak) is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position contr... More Details...
Brands
Gift Vouchers
