Digilent Analog Discovery 2

The Digilent Analogue Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, visualise, generate, record, and control mixed-signal circuits of all kinds. Developed in conjunction with Analogue Devices and supported by Xilinx University Program, Analogue Discovery 2 is small enough to fit in your pocket, but powerful enough to replace a stack of lab equipment, providing engineering students, hobbyists, and electronics enthusiasts the freedom to work with analogue and digital circuits in virtually any environment, in or out of the lab.

The analogue and digital inputs and outputs can be connected to a circuit using simple wire probes to connect and utilise the inputs and outputs. Driven by the free WaveForms 2015 (Mac, Linux and Windows Compatible) software, Analogue Discovery 2 can be configured to work as any one of several traditional instruments.

Includes:

• Analogue Discovery 2
• Enclosure
• USB A to micro B programming cable
• 2x15 flywire signal cable assembly
• 5-pack of 6-pin male headers
• Ferrite cable snap-on

• Two-channel USB digital oscilloscope (1MΩ, ±25V, differential, 14-bit, 100Msample/sec, 30MHz+ bandwidth - with the * Analogue Discovery BNC Adaptor Board)
• Two-channel arbitrary function generator (±5V, 14-bit, 100Msample/sec, 20MHz+ bandwidth - with the Analogue Discovery BNC Adaptor Board)
• Stereo audio amplifier to drive external headphones or speakers with replicated AWG signals
• 16-channel digital logic analyser (3.3V CMOS, 100Msample/sec)
• 16-channel pattern generator (3.3V CMOS, 100Msample/sec)
• 16-channel virtual digital I/O including buttons, switches, and LEDs – perfect for logic training applications
• Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS)
• Single channel voltmeter (AC, DC, ±25V)
• Network analyser – Bode, Nyquist, Nichols transfer diagrams of a circuit. Range: 1Hz to 10MHz
• Spectrum Analyser – power spectrum and spectral measurements (noise floor, SFDR, SNR, THD, etc.)
• Digital Bus Analyzers (SPI, I²C, UART, Parallel)
• Two programmable power supplies (0…+5V , 0…-5V). The maximum available output current and power depend on the Analogue Discovery 2 powering choice:
  • 250mW max for each supply or 500mW total when powered through USB
  • 700mA max or 2.1W max for each supply when using an external wall power supply

• Datasheet
• Waveforms 2015
• Digilent Resource Centre