Battery Holders

Battery Holders

A battery holder makes it easy to connect common battery sizes to your electronics or robotics project. The holders are designed to hold standard sizes like AA, AAA batteries and typically have wires attached that you can solder to your circuits.

The holders are specified by the battery size and work with rechargeable batteries like NiMh, NiCd or disposable batteries such as Alkaline or Zinc Carbon.

 

Battery Holder 2xAAA with Cover and Switch

Code: SKU-000452

This 2xAAA battery holder puts a nice finishing touch on your battery powered project. This holder features a sliding, removable cover as well as an ON/OFF switch which can be used to control power to your project. The leads are about 150mm long, and the last 5mm of them are tinned.

$1.70

Order As Required

Back orders: 0 available

Battery Holder 3xAA with Cover and Switch

Code: SKU-000818

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project.

$2.25

Order As Required

Back orders:
Ship 35 units in 7 days

Coin Cell Battery Holder - 12mm (PTH)

Code: SKU-000131

This is a through hole 12mm coin cell battery holder. It’s the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. Metal housing is +, PCB pad underneath is -. This battery holder is sold in single units. Documents: Datasheet

$1.00

Order As Required

Back orders:
Ship 108 units in 7 days

Coin Cell Battery Holder - 12mm (SMD)

Code: SKU-000727

This is the SMD version of PRT-07948 , which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is connected to the negative side.

$1.10

Order As Required

Back orders:
Ship 49 units in 7 days

Coin Cell Battery Holder - 20mm (PTH)

Code: SKU-000118

Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries. Documents: Datasheet

$1.10

Order As Required

Back orders:
Ship 488 units in 7 days

Coin Cell Battery Holder - 20mm (SMD)

Code: SKU-001174

Now for all of your coin cell battery surface mount needs, the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction.

$1.10

Order As Required

Back orders:
Ship 524 units in 7 days

Coin Cell Battery Holder - 24.5mm (PTH)

Code: SKU-000261

Through hole 24.5 mm coin cell holder. This holder fits our rechargeable 24.5mm Lithium Ion coin cell battery. Holds battery in place with friction. Metal housing is +, PCB pad underneath is -. Documents: Datasheet

$1.35

Order As Required

Back orders: 0 available

Coin Cell Battery Holder - 2xCR2032 (Enclosed)

Code: SKU-001774

This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and safely kept closed via two phillips head screws.

$2.80

Order As Required

Back orders:
Ship 738 units in 7 days