GPS

GPS

GPS (Global Positioning System) sensors measure location on the earths surface thanks to a network of satellites and then output this as a stream of data containing latitude, longitude and more. This stream can be read by any device capable of serial communication and is well suited to small microcontrollers.

JST SH Jumper 6 Wire - 1.75"

Code: SKU-000085

This is a 1.75" long JST SH communication cable which can be cut and hacked to your needs and can even be used as pigtails. This little guy can really help your GPS project if you don’t have a lot of space to spare! This cable has two a 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.

$4.45

Order As Required

Back orders:
Ship 14 units in 7 days

JST SH Vertical 6-Pin Connector - SMD

Code: SKU-000086

Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Documents: Datasheet

$2.80

Order As Required

Back orders:
Ship 65 units in 7 days

Molex Flexible GNSS Antenna - U.FL (Adhesive)

Code: SKU-005439

The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers.

$6.95

Order As Required

Back orders:
Ship 574 units in 7 days

Pixhawk 4 Flight Controller

Code: SKU-004939

The Pixhawk 4 is an advanced development kit for the PX4 autopilot and is the latest update to the family of Pixhawk flight controllers. The flight controller has been designed and developed in collaboration with Holybro and Auterion, optimised to run PX4.

$557.95

Order As Required

Back orders:
Ship 38 units in 7 days

Pixhawk 4 Mini Flight Controller

Code: SKU-005298

The Pixhawk 4 Mini is an advanced (and as the name implies), miniaturized development kit for the PX4 autopilot. The flight controller has been designed and developed in collaboration with Holybro and Auterion, optimised to run PX4.

$463.95

Order As Required

Back orders:
Ship 2 units in 7 days

Pycom Pytrak

Code: SKU-005265

Pycom Pytrack Expansion Shield adds the functionality of a super accurate GNSS, Glonass GPS to Pycom development boards. Pytrack shields use a USB interface with serial access while including a LiPo battery charger, MicroSD card capability, and a three-axis, 12-bit accelerometer.

$93.95

Order As Required

Back orders: 0 available

RockBLOCK External Patch Antenna

Code: SKU-004590

The RockBLOCK External Patch Antenna is a high-performance magnetic mount antenna designed specifically to communicate efficiently with the Iridium® Satellite Communication system.

$122.95

Order As Required

Back orders:
Ship 19 units in 7 days

SparkFun GNSS Chip Antenna Evaluation Board

Code: SKU-005440

What is the best chip antenna for your GNSS project? There are tons to choose from, but finding the right one might be tricky so here's a board that helps make deciding easier. The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennae and geometries.

$37.95

Order As Required

Back orders:
Ship 62 units in 7 days

SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)

Code: SKU-005424

The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations.

$55.95

Order As Required

Back orders:
Ship 120 units in 7 days

SparkFun GPS Breakout - XA1110 (Qwiic)

Code: SKU-004374

The SparkFun XA1110 GPS Breakout is a small I 2 C-supported module built for easy hookup, thanks to our Qwiic Connect System.

$84.95

Order As Required

Back orders:
Ship 76 units in 7 days