Pullys and Belts

Actobotics Pullys and Belts

Smooth Belt - 1/8"D (7.5" ID)

Code: SKU-001381

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt.

$4.45

Order As Required

Back orders: 0 available

Smooth Belt - 1/8"D (8.0" ID)

Code: SKU-001675

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt.

$5.95

Order As Required

Back orders: 0 available

Smooth Belt - 1/8"D (9.0" ID)

Code: SKU-001583

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows them to apply tension on the pulleys when stretched and the rubber construction creates excellent grip characteristics between the pulley and belt.

$6.95

Order As Required

Back orders: 0 available

Timing Belt - XL (per foot)

Code: SKU-001336

These are resistant XL sized timing belts that fit snug inside of the Actobotics timing pulleys. Each belt is made out of neoprene with fiberglass cords running its length to provide a fair ammount of strength and durability. The timing belts have a width of 3/8", a length of 12", and a 1/5P.

$6.95

Order As Required

Back orders:
Ship 176 units in 7 days

Timing Belt Mount - XL

Code: SKU-001491

This timing belt mount let’s you clamp a portion of an XL timing belt to other Actobotics parts. It uses 4 6-32 tapped holes to connect to any 0.77" hole pattern. This can connect to channels, hub spacers, or anything else you want to move with a timing belt.

$6.95

Order As Required

Back orders:
Ship 2 units in 7 days

Timing Pulley - Shaft Mount (10T; 6mm Bore)

Code: SKU-001661

These shaft-mountable aluminium timing pulleys use XL timing belts and attach to a 6mm output shaft with a set screw. They have 10 teeth with a gear pitch of 1/5P, an outer diameter of 0.6”, a bore of 6mm, and requires a belt width of 3/8”.

$12.95

Order As Required

Back orders:
Ship 5 units in 7 days

Timing Pulley - Shaft Mount (15T; 0.25" Bore)

Code: SKU-002158

These shaft-mountable aluminium timing pulleys use XL timing belts and attach to a 0.25" output shaft with a set screw. They have 15 teeth with a gear pitch of 1/5P, an outer diameter of 1”, a bore of ¼", and requires a belt width of 3/8”.

$16.95

Order As Required

Back orders: 0 available