Hookup

Hookup Cables

Hookup cables for prototyping and connecting things

Raspberry Pi GPIO Shrouded Header - 2x20 (RPi2, B+)

Code: SKU-001986

This 2x20 shrouded header has the same number and spacing of pins as the Raspberry Pi 2 and Model B+ so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.

$1.25

Order As Required

Back orders:
Ship 735 units in 7 days

Ribbon Cable - 10 wire (15ft)

Code: SKU-000749

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. length of 10-wire ribbon cable.

$6.95

Order As Required

Back orders:
Ship 387 units in 7 days

Ribbon Cable - 10 wire (3ft)

Code: SKU-000750

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 3ft. length of 10-wire ribbon cable.

$1.50

Order As Required

Back orders:
Ship 357 units in 7 days

Ribbon Cable - 6 wire (15ft)

Code: SKU-000748

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. length of 6-wire ribbon cable.

$3.70

Order As Required

Back orders:
Ship 878 units in 7 days

RockBLOCK 9603 Accessory Cable

Code: SKU-004728

This is a simple accessory cable meant to be used in conjunction with the RockBLOCK 9603. The RockBLOCK 9603 Accessory Cable is terminated with a simple 10-pin molex-style connector at one end and a male hookup pigtail at the other.

$8.95

Order As Required

Back orders:
Ship 1430 units in 7 days

Sensor Cable - Electrode Pads (3 connector)

Code: SKU-001930

This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set. Dimensions: 24" Long Documents: Product Video

$9.95

Order As Required

Back orders: 0 available

SparkFun Qwiic Cable Kit

Code: SKU-005219

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we’ve assembled this Qwiic Cable Kit for everyone.

$14.95

Order As Required

Back orders:
Ship 50 units in 7 days

SWD Cable - 2x5 Pin

Code: SKU-005666

This is a 150mm (~6") long, 10-conductor cable that's especially ideal for many JTAG applications. Both ends are terminated with 2x5 pin female connectors with 1.27mm (0.05") spacing. Documents: Datasheet

$3.70

Order As Required

Back orders:
Ship 533 units in 7 days

UHF RFID Cable (TNC to SMA)

Code: SKU-003958

This is a very simple 1m long TNC to SMA cable. We like to use this cable to connect our ultra high-frequency RFID antennae to an equally powerful reader board. This cable is perfect for extending pre-existing cables to give yourself a better range of operations when managing your RFID projects.

$11.95

Order As Required

Back orders:
Ship 210 units in 7 days

XLR-3 (DMX) Cable - 10ft

Code: SKU-005384

This is a 10 foot (~3m) long DMX cable capable of better communications for lighting and special effects through standard or digital communication protocols.

$17.95

Order As Required

Back orders:
Ship 84 units in 7 days