Plastic Gear Motors

Plastic Gear Motors

At a lower cost than metal gearmotors these motors with plastic gearboxes can be the ideal drive system for a small robot. The gears are typically long lasting nylon and the motors fit a range of different wheels.

Clear

48:1 Gear Motor with two 90 deg outputs (PAIR)

Code: MEC-030218

This pair of 48:1 gear motors (gearbox with motor) have low-current motors that provide power and speed that is comparable to an RC servo at a fraction of the cost. Designed to work with our plastic wheels. ** Sold as a pair **

$ 9.95

In stock in Australia

Shipping from $7.90

+lots more from our supplier in 3 weeks

Dagu Continuous Rotation Servo with Wheel S04NF

Code: MEC-30088

With a standard sized servo and included 38mm diameter wheel this unit makes for a very low cost robot drive system. Combine two units to create a full differential drive system with speed and direction control.

$ 16.95

In stock in Australia

Shipping from $7.90

+lots more from our supplier in 3 weeks

Hobby Gearmotor - 65 RPM (Right Angle, Pair)

Code: SKU-002109

These are a pair of right angle, hobby gearmotors from DAGU. These gearmotors are the same ones utilised in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning.

$ 8.95

In stock in Australia

Shipping from $7.90

Hobby Gearmotor - 200 RPM (Pair)

Code: SKU-002131

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor also possess a 9mm long output on a straight axis.

$ 8.95

In stock in Australia

Shipping from $7.90

+48 more from our supplier in 7-10 days

Hobby Motor and Encoder Kit

Code: SKU-002111

This is the Hobby Motor and Encoder Kit from DAGU, an inexpensive and reliable set of add-ons for your next robotic project. Inside this kit are three pairs of items: wheels, gearmotors, and wheel encoders (including everything you need to hook them up).

$ 59.95

In stock in Australia

Shipping from $7.90

+5 more from our supplier in 7-10 days

120:1 Mini Plastic Gearmotor HP, Offset 3mm D-Shaft Output, Extended Motor Shaft

Code: SKU-002646

This compact, inexpensive plastic gearmotor ( high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.

$ 11.95

Special Order

Shipping from $7.90

+520 more from our supplier in 7-10 days

Solarbotics GM2 224:1 Gear Motor Offset Output

Code: MEC-30015

This 3-6 Volt gearmotor from Solarbotics has a 224:1 gear ratio and is a low current motor that is comparable to a continuous rotation servo only much cheaper.

$ 14.95

Special Order

Shipping from $7.90

+18 more from our supplier in 7-10 days

Solarbotics GM3 224:1 Gear Motor 90 deg Output (Single Motor Only)

Code: MEC-30045

This 224:1 gearmotor (gearbox with motor) has a low-current motor and provides power and speed that is comparable to an RC servo at a fraction of the cost. ** Single Motor Only ***

$ 14.95

Special Order

Shipping from $7.90

+30 more from our supplier in 7-10 days

Solarbotics GM8 143:1 Gear Motor Offset Output - One only

Code: MEC-30016

This 3-6 Volt gearmotor from Solarbotics has a 143:1 gear ratio and is a low current motor that is comparable to a continuous rotation servo only much cheaper. **Single unit only**

$ 14.95

Not currently available

Solarbotics GM9 143:1 Gear Motor 90 deg Output

Code: MEC-30046

This 143:1 gearmotor (gearbox with motor) has a low-current motor and provides power and speed that is comparable to an RC servo at a fraction of the cost.

$ 14.95

Special Order

Shipping from $7.90

+17 more from our supplier in 7-10 days