The 9DOF Razor IMU incorporates three sensors - an ITG-3200 (triple-axis gyro), ADXL345 (triple-axis accelerometer), and HMC5883L (triple-axis magnetometer) - to give you nine degrees of inertial measurement. The outputs of all sensors are processed by an on-board ATmega328 and output over a serial interface.More details...
This sensor is a carrier/breakout board for the ST L3GD20 three-axis gyroscope, which measures the angular rates of rotation about the pitch (x), roll (y), and yaw (z) axes. Angular velocity measurements with a configurable range of ±250°/s, ±500°/s, or ±2000°/s can be read through a digital I²C or SPI interface. Works over 2.5–5.5 V.More details...
This triple-axis accelerometer is a carrier board for the Freescale MMA7361L XYZ-axis accelerometer, a great low-g sensor with analog voltage outputs and adjustable sensitivity (±1.5 g or ±6 g), and a 0g-detect digital output that signals when the board is in free-fall. The board has a 3.3V linear regulator that enables an input voltage range of 2.2-16 V.More details...
The Pololu MinIMU-9 v2 is an inertial measurement unit (IMU) that packs an 3-axis gyro and a 3-axis accelerometer and 3-axis magnetometer onto a tiny board. Interface via I²C interface for rotation, acceleration, and magnetic measurements. It includes a voltage regulator and a level-shifting circuit that allows operation from 2.5 to 5.5 VMore details...
The UM6-LT ultra-miniature orientation sensor from CH Robotics is uses rate gyros, accelerometers, magnetic sensors, and an on-board 32-bit ARM Cortex processor to compute sensor orientation 1000 times per second. Sensor orientation is reported using either quaternions or Euler angles over a TTL serial interface at user-customizable rates.More details...
